|
Computer system requirements:
Below are the minimum computer-system requirements for StudioLive 64S.
macOS®
macOS version 10.13 or later
200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates)
Available USB port
Windows®
Windows 10 or later (64-Bit Only)
200 MB storage space and 8 GB RAM for Universal Control (required for firmware updates and low-latency ASIO support)
Available USB port
The above are the hardware system requirements for this product.
DAW software and Operating System requirements vary.
Click here for Studio One’s system requirements.
Click here for Qmix-UC’s system requirements
Click here for UC Surface’s system requirements.
VST Compatible Logo ASIO Compatible Logo
VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH
USB-C® is a registered trademark of USB Implementers Forum
All other trademarks are property of their respective holders
Technical Specifications
Mi crophone Preamplifier
Input Type
XLR Female, balanced
Frequency Response to Main Output (at unity gain)
20-20 kHz, ±0.5 dBu
Input Impedance
1 k?
THD to Main Output
<0.005%, +4 dBu, 20-20 kHz, unity gain, unwtd
S N Ratio to Main Output (Ref = +4 dB, 20 kHz BW, unity gain, A-wtd)
94 dB
Common Mode Rejection Ratio (1 kHz at unity gain)
65 dB
Gain Control Range (±1 dB)
0 dB to +60 dB
Maximum Input Level (unity gain)
+12 dBu
Phantom Power (±2 VDC)
48 VDC, switchable per channel
Line Inputs
Type
¼” TRS Female, balanced
Frequency Response to Main Output (at unity gain)
20-20 kHz, ±0.5 dBu
Input Impedance
10 k?
THD to Main Output
<0.005%, +4 dBu, 20-20 kHz, unity gain, unwtd
S N Ratio to Main Output (Ref = +4 dB, 20 kHz BW, unity gain, A-wtd)
94 dB
Maximum Input Level
+18 dBu
Tape Inputs
Type
RCA Female, unbalanced (stereo pair)
Maximum Input Level
+12 dBu, ±0.5 dBu
XLR Outputs
Type
XLR Male, balanced
Maximum Output Level
+24 dBu, ±0.5 dBu
Output Impedance
100?
Line Outputs
Type
¼” TRS Female, balanced
Maximum Output Level
+18 dBu, ±0.5 dBu
Output Impedance
100?
Tape Outputs
Type
RCA Female, unbalanced (stereo pair)
Maximum Output Level
+18 dBu, ±0.5 dBu
Output Impedance
100?
Headphone Output
Type
¼” TRS Female, active stereo
Maximum Output
100 mW ch. @ 60? load
Frequency Response
20 Hz – 20 kHz (± 0.5 dB)
THD+N
0.01%, 1 kHz, max gain, 20 Hz BW, unwtd
S N Ratio
96 dB, 1 kHz, max gain, 20 Hz BW, unwtd
System Crosstalk
Input to Output
-90 dB (Ref = +4 dBu, 20 Hz-20 kHz, unwtd)
Adjacent Channels
-87 dB (Ref = +4 dBu, 20 Hz-20 kHz, unwtd)
Digital Audio and Control
ADC Dynamic Range
115 dB (A-wtd, 48 kHz)
DAC Dynamic Range
115 dB (A-wtd, 48 kHz)
USB Recording Port
USB 2.0, Type-B
Bluetooth™ Input
4.1, stereo
AES EBU Output
XLR Male
Network Control Port
RJ-45
AVB Audio Network Port
Locking XLR Ethernet
Internal Processing
32-bit, ?oating point
Sampling Rate
48 kHz, 44.1 kHz
A D A Bit Depth
24
Reference Level for 0 dBFS
+18 dBu
Total System Latency
1.9 ms (local routing, analog in-analog out, all processing active)
Clock
Jitter
<20 ps RMS (20 Hz – 20 kHz)
Jitter Attenuation
>60 dB (1 ns in, 1 ps out)
Power Environmental
Connector
IEC
Input-Voltage Range
90 to 230 VAC (±10%)
Power Requirements (continuous)
85W
Recommended Ambient Operating Temperature
0? to 40? Celsius 32? to 104? Fahrenheit
Physical
Height
6.51” (165.36 mm)
Width
32.37” (822.21 mm)
Depth
22.97” (583.48 mm)
Weight
37.2 lbs. (16.9 kg)
As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.
| 
